![Georges Gadgets](/img/default-banner.jpg)
- 24
- 363 482
Georges Gadgets
United States
Приєднався 3 чер 2017
I am just starting out but I am really looking to ramp up production! I love 3D printing and want to learn more about CNC in general. Please leave me some comments and find me on social media, I would love to hear from you.
Designing Multi-Color/Material 3D Prints
My Miffy Piggybank:
www.thingiverse.com/thing:4201003
Little Baby Miffy:
www.thingiverse.com/thing:4201376
Hey guys! I'm back with another video....finally. I wanted to make my own multi-color print for a long time and I didn't really find any videos on how to do it. So I decided to make my own video on how to design and print your very own multicolor 3d print!
Capricorn PTFE: amzn.to/32O8W1m
PTFE Push Fitting: amzn.to/2Im0ddo
PTFE Separator:
www.thingiverse.com/thing:3166394
Auto Rewind:
www.thingiverse.com/thing:3338467
M10 PTFE Holder:
www.thingiverse.com/thing:3657251
www.thingiverse.com/thing:4201003
Little Baby Miffy:
www.thingiverse.com/thing:4201376
Hey guys! I'm back with another video....finally. I wanted to make my own multi-color print for a long time and I didn't really find any videos on how to do it. So I decided to make my own video on how to design and print your very own multicolor 3d print!
Capricorn PTFE: amzn.to/32O8W1m
PTFE Push Fitting: amzn.to/2Im0ddo
PTFE Separator:
www.thingiverse.com/thing:3166394
Auto Rewind:
www.thingiverse.com/thing:3338467
M10 PTFE Holder:
www.thingiverse.com/thing:3657251
Переглядів: 904
Відео
Install a buck converter on YOUR 3D printer for the raspberry pi
Переглядів 30 тис.5 років тому
Today I wanted to go over how to install a buck converter on your 3D printer so it can power your raspberry pi! I am doing this on my Ender 3 but it can be done on any printer and I plan to install a buck converter on any printer I run a raspberry pi on. A special thanks goes out to ABOX for supplying the raspberry pi for this video, check them out in the link below. ABOX Raspberry pi kit: amzn...
How to upgrade/improve the 3D Printer Tevo Tarantula's Firmware
Переглядів 17 тис.5 років тому
I finally finished my Tevo Tarantula series! It has been to long but I uploaded the marlin 2.0 firmware and it is printing like a pro now. I go through where I last left off with the cable chain and then proceed to installing the firmware. It was a lot of fun and now I have a fully functioning printer that prints pretty darn well. Tevo Tarantula 3D Printer Amazon: amzn.to/2S6Txnd Gearbest: goo....
Upgrading the Ender 3 bed with magnets! BuildTak FlexPlate
Переглядів 6 тис.5 років тому
Today I installed a BuildTak FlexPlate system onto my Ender 3 and I love it! It really makes removing prints from the bed so much easier. It was really easy to install and only took about a half hour. After the install it printed right away after leveling again. I hope you all enjoy! www.buildtak.com/ Ender 3 Printer Amazon: amzn.to/2NVml3r Gearbest: www.gearbest.com/3d-printers-3d-printer-kits...
Ender 3 3D Printer Best bang for your buck!
Переглядів 2,7 тис.5 років тому
Hello everyone! I wanted to get the Ender 3 3D printer for a while now because of all the hype. I think that it is safe to say that it is the best bang for your buck! The Ender 3 is a great 3D printer that helps make it affordable to a wider range of people. Also, you don't have to worry about terrible issues that other cheap printers have. It was super easy to assemble and if I had a time mach...
3D Printing SMITE's Poseidon & Louvre Sculptures with Marble Filament
Переглядів 3,2 тис.5 років тому
I talk about my experience 3d printing poseidon from the video game SMITE. I also 3D print art from the Louvre and other museums. I do these all in Ziro’s marble filament which I think came out very nicely! The prints were done on my Prusa MK2 and Prusa MK3 and I used Octolapse for the timelapse of the Poseidon character. Please let me know what you think and leave me any suggestions below, I l...
Assembling the IKEA Lack Enclosure & 3D printer Prusa MK3 new carriage
Переглядів 64 тис.5 років тому
Thank you all for watching my video where I go through how I assembled the IKEA lack enclosure (www.prusaprinters.org/cheap-simple-3d-printer-enclosure/) and the new MK3 X-axis for the hotend (www.prusaprinters.org/prusa-research-summer-update-2018/#cooling). All of the different 3D printed parts and purchased parts are down below. If I missed something please let me know. It was a lot of fun p...
My ERRF Experience e3d, Proto-Pasta +more East Coast Reprap Festival
Переглядів 6946 років тому
Let me know what kind of questions you guys want me to ask at the next festival. I will be brining a mic next time so I can interview e3d and proto-pasta and more! I really had a fun time at the east coast reprap festival (ERRF). I just wanted to share some of the fun with you guys! Mosaic Palette : amzn.to/2JV7vZ6 Budman: www.budmen.com Greybeard3d: Greybeard3d.com Kuntry Klub: ua-cam.com/chan...
3D Printing in Multi-Color with the Mosaic Palette+ on my Prusa MK3
Переглядів 81 тис.6 років тому
I just got the mosaic palette and after using it for a week I can say this thing is AMAZING. The multi-colored prints I can accomplish with it are breathtaking. I really liked how the software was very self-explanatory. Of course, like anything else with 3D printing, this takes some calibration so do not get discouraged like I did when you first get this. If you want me to go more in depth into...
3D print-in-place Iris Box on Prusa mk3 in AIO White PLA
Переглядів 8 тис.6 років тому
Check out my 3d print of LoboCNC’s print-in-place Iris Box! It was printed on my Prusa MK3 in AIO white filament. I really like how it came out and I think LoboCNC did a good job on this. Links to everything are below. 3D Print link: www.thingiverse.com/thing:1817180 Prusa MK3 3D Printer: www.prusa3d.com/ White AIO Filament: amzn.to/2Jrw92a Social Media Links: Instagram: @georgesgadgets Twitter...
Lord of the Rings Minas Tirith 3D printed on PRUSA MK3 in 3D MARS PLA
Переглядів 25 тис.6 років тому
Check out my 3d print of Minas Tirith! It was printed on my Prusa MK3 in 3D Mars white filament. I really like how it came out and I think Clavenmoo did a good job on this. Links to everything are below. 3D Print link: www.thingiverse.com/thing:2769306 Prusa MK3 3D Printer: www.prusa3d.com/ 3D Mars Filament: amzn.to/2KANtPe Social Media Links: Instagram: @georgesgadgets Twitter: @Georges_Gadget...
Improve the Tevo Tarantula with the Tactical X Carriage upgrade
Переглядів 14 тис.6 років тому
Another day another upgrade that improves the Tevo Tarantula, this time I installed the tactical x carriage. This took a long time to do, but the Tevo is better off because of it. Honestly, many things that bother me about 3d printers in general is their lack of customization. Pin13 did an amazing job of creating an upgrade for the tarantula that adds a very expensive commercial option. Banholm...
Assembly and Install of my makerspace ambient light fixture
Переглядів 4966 років тому
Thank you for checking out this makerspace upgrade video where I install an ambient light fixture! I have linked all the parts I used below so you can try it out if you want. I am not an expert at installing lights or even how to set up ambient lighting. I just wanted to have some cool lighting for my 3d printing makerspace! Let me know what you guys think in the comments below! Light Bulbs: am...
Insert parts into 3D printed objects! Using the Prusa MK3
Переглядів 9 тис.6 років тому
YO everybody, I missed you guys. Today I am uploading a video that talks about how the Prusa MK3 3D Printer’s ability to pause prints and either change filament or allow you to place parts in the printed out objects. This means you can insert parts into 3D printed objects without having to do it post print. Many other 3D printers have this capability, but I found this quick trick with the Prusa...
Raspberry Pi Zero W - Kernel Panic - Octoprint - Problem Solved
Переглядів 9 тис.6 років тому
This description is basically the same as the "parent video" of this video. I uploaded this in the hopes of helping fellow makers that have run into this random kernel panic issue I had while trying to install octoprint on a raspberry pi zero. Let me know if it helped you, or if what I am saying is complete nonsense. It worked for me! Pi Zero Case www.thingiverse.com/thing:2734810 Pi Cover www....
How to Install AND GIVEAWAY the Raspberry Pi Zero W on the Prusa MK3
Переглядів 8 тис.6 років тому
How to Install AND GIVEAWAY the Raspberry Pi Zero W on the Prusa MK3
The Prusa MK3 Arrived! Is it worth it? I go over initial thoughts
Переглядів 20 тис.6 років тому
The Prusa MK3 Arrived! Is it worth it? I go over initial thoughts
Why you need to upgrade/improve the 3D Printer Tevo Tarantula's Z Axis
Переглядів 21 тис.6 років тому
Why you need to upgrade/improve the 3D Printer Tevo Tarantula's Z Axis
Upgrade and improve the Tevo Tarantula's Bed/Y-belt tensioner
Переглядів 12 тис.6 років тому
Upgrade and improve the Tevo Tarantula's Bed/Y-belt tensioner
Why you need to upgrade and improve the 3D Printer Tevo Tarantula's power supply
Переглядів 12 тис.6 років тому
Why you need to upgrade and improve the 3D Printer Tevo Tarantula's power supply
Pros and Cons - Should you get an assembled or DIY kit 3d printer?
Переглядів 6336 років тому
Pros and Cons - Should you get an assembled or DIY kit 3d printer?
Making 3D Printed DIY Ornaments for my Christmas Tree
Переглядів 1,1 тис.6 років тому
Making 3D Printed DIY Ornaments for my Christmas Tree
Design, Develop, Demo - Testing DIY Prints! #1: Kitchen Gadgets
Переглядів 8586 років тому
Design, Develop, Demo - Testing DIY Prints! #1: Kitchen Gadgets
11 Reasons the Prusa MK3 is a MUST HAVE!!!
Переглядів 16 тис.6 років тому
11 Reasons the Prusa MK3 is a MUST HAVE!!!
hi do you still have the jim brown version of marlin. the github is closed now can you link it or send the file if possible, please and thank you
It's not converting voltage it's stepping the voltage down, it's a buck transformer. Boost transformers step voltage up. If it was taking AC and changing it to DC then it would be a converter.
Can i use this bucker converter to power my rpi4?
Amazing! THANK YOU! For others, do note this can also happen due to chipset overheating!
Great video! can you advise some details on the spool holder you decided to use, is it fixed to the top of the lack table? Did you make the hole for the filament guide in the centre of the top. Thanks
3:18 I immediately stop the video as soon as he said "circle thingy majigs" 🤨 🕶🤏
Hello can someone send me a link for the raspberry case file please
What a waste😁
No videos in 2 years. Where ya at buddy?
Thanks I spent hours trying to figure out why I was getting kernel panic on apt update.
Thanks for this, I am doing a build on my ender 3v2 to add an 80mm PSU fan and dual 4010 MB fans. While I am doing that I thought "what if I added a USB power for my GoPro clone camera that lives on the printer as part of my ah-hoc video monitor system"? And since the 80mm fans are 12v and have to be stepped down and the buck converters came in a 3 pack, things looked good, So I wanted to see if anyone had done this and looks like I can either run the usb -c at 12 v or add a second Buck to drop it to 5v. Have read that USB-C ports can be configured with 5V 1.5A and 3A for up to 15W of power. Thank you for the proof of concept in this video. Great work.
Thanks for your help! I was stuck for hours. Downclocking the RPI Zero W is the answer. Kernel panic is NOT an issue now.
There is no 1.9 IDE
I am so sad that this channel died.
Link goes to 404 :(
frank advice, in the future, please show the actual product itself more than yourself. thanks for the video though.
A MA ZING !!!!
Are those waste blocks from one single print?
"Get a metric screw set" What? Like, do anything else even exist? Metric FTW.
what is the site you metioned that was used to make it 3d?..
if you combine his eyebrows it makes the bat signal lol..
I tried to hook up a buck converter to the power supply and I blew up the buck converter and something flew and damaged my monitor
Maybe I'm just stupid but half way through and I'm still not sure what to do. on to the next- not taking chances
CAN YOU SEND ME THE LINK MY CUPUTER IS NOT LETTING ME GETT THE LINK?
I appreciate the video, but would be a lot more helpful if the link were to the actual product you installed rather than just the manufacturer and leaving it to us to figure out which exact thing you are recommending.
I see the Black Bird
Did you use Supports?
When I heard “To push the bearing in I used a 10mm socket” I expected you to say the longest part of the build was searching for it.
I had the same problem. The only solution I could find was your video. It works, thank you very much!
Georges Gadgets, sorry to hear you don't fully appreciate Canada, eh. That's fine you're entitled to your own opinion bud.
Hi! I have this case to my pi. Please send to my STL.
There's a lot to go wrong with that machine lol. Good luck bro and thanks for the great content.
what size eye connectors does the meanwell psu use
Have anyone a palette + for sale? :) I'am searching for someone as alternative to palette 2s PN me please
Ye ive this does not Work before you flash the oparating system on the sd card make sure to format it
Can you buy this on aliexpres ,printer with multicolor
my micro usb cable has only two cables inside. they are blue and white - can i still use them to power and which color is positive? thank you in advance!
You saved my life, hero!
does this have the print resume feature after power cuts?
my pi zero w with an 8gb no-name sd card and a brand new raspbian buster image always crashed when I enabled wi-fi. This fix worked for me, thanks!
Awesome buddy grate video very helpful 👍🏼
... if you just attach 5v input to one of the 5v rails on the GPIO, it's not going to run through the power supply properly, and you will have issues.... this isn't a safety mechanism, its that the raspi isn't designed to be idiot proof. notice all the little chips right around the power port on the raspi? that's a power supply. it takes the 5v in and acts essentially like those buck converters there, steping the power down to what is needed by the various and sundry chips in the raspi (notably 3.3v and 1v)... putting power through these chips doesn't always work backwards because of the presence of transistors, which limit flow selectively, and diodes, which limit flow in one direction but not the other...
I am the idiot, does that mean those 5v rails are for output only?
oh lord, okay, people: buy a USB fixed buck converter. 5.1 is probably still too low. when you test like that there is no voltage drop, which will be present when there is current draw. they make buck converters that output USB standard power, and they're designed to deal with that drop. they're available on amazon and basically the same price. has wires on one end that go to the power supply and a USB port on the other. want to get really fancy, they make ones that actually go to MicroUSB and USB C to power your pi directly off the converter
thank you, will be adding that to my shopping list
how to get cold solder joints 101
THE WASTE. For the love of God, and the environment, just paint the thing you lazy bum.
Your setap investment all money
The link doesn't work
What were your probe offset figures you used in marlin ?
to much talking! i need faster input next time, thanks for help!
Ill be honest, I was sceptical of this approach. However i tried my SanDisk SD card in my Raspberry 4 and I kept getting the same fault. However i follwed the steps and it worked a treat. Very impressive. Thank you!!!